The D12A is designed with its cone-nipple for use with high pressure pumps. The valve passage at 2.4 mm is larger (by about 50%) than that of any other commercially available cone nipple...
The D18C is designed with its quick connector for use with low pressure pumps. By omitting a valve is the outlet with 8mm downright huge and suitable for filling in large quantities ...
The D18CX is designed with its quick connector for use with low pressure pumps. By omitting a valve is the outlet with 5mmsuitable for multistage injection...
The D18CF is designed with a quick connector for use with low pressure pumps. The spring-loaded valve with a passband of 4.5 mm is suitable for filling large volumes with...
The D18CTF is designed with a quick connector for use with low pressure pumps. The special feature of the D18CTF lies in the changed position of the valve.The valve has been making it suitable for use at a 45° angle. This ensures the valve stays intact after...
The infusion tube has spray bores (Ø 1mm) in a V-formation at a 60° angle in a distance of 80mm. The D18CF-IR is developed specifically for hydrophobing agents and emulsions, which are introduced through a pressure pulse method. Through the pressure pulse...
The tube extended (Ø 16mm) packer, is for GEL-injection, that brings the material directly through to the other side of the wall. Cavities in the wall are bridged by the pipe...
EN 
DE 
